User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
146
4.9.1.5 MSTP Port Information
This page allows you to configure the MSTP Port Information settings for Managed PoE+ Switch as the screen in Figure 4-9-9
appears.
Figure 4-9-9: MSTP Port Information Configuration Page Screenshot
The page includes the following fields:
Object Description
• Port
Select specific port for further configuration.
MSTP Port Settings
• Instance ID This column provides configuring the Instance ID settings.
• Internal Path Cost
•
(0-200000000,0=Auto)
This column provides configuring the Internal Path Cost settings; the available
range is
0
to
200000000, 0=Auto
.
• Priority
• (0-240)
This column provides configuring the Priority settings; the available VID range is
0 to 240.
• MTSI Display MSTI information.
• Designated Bridge Display Designated Bridge information.
• Internal Path Cost
Display Internal Path Cost information.
• Priority
Display Priority information.
• Status
Display Status information.
• Role
Display Role information.
• Action
: press this button to edit specific MSTP Port Settings.
Buttons
: press this button to find MSTP Port information.
: press this button to take effect.