User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
144
4.9.1.3 MST Configuration Identification
This page allows you to configure the MST Configuration Identification settings for Managed PoE+ Switch as the screen in
Figure 4-9-7 appears.
Figure 4-9-7: MST Configuration Identification Configuration Page Screenshot
The page includes the following fields:
Object Description
MST Configuration Identification Settings
• Configuration Name This column provides configuring the configuration name and the available
characters is 32.
• Revision Level This column provides configuring the Revision Level settings and the available
range is
0
to
65535
.
Instance ID Settings
• MSTI ID (1-4094) This column provides configuring the MSTI ID settings and the available range
is
1
to
4094
.
• Action This column provides selecting the Action of MSTI; the default version is Add
VID and available options are Add VID and Remove VID.
• VID List (1-4094) This column provides configuring the VID List settings f MSTI; the available VID
range is
1
to
4094
.
• MTSI ID Display MSTI ID information.
• VID List Display VID List information.
• Action
: press this button to edit specific Instance ID Settings.
: press this button to delete specific Instance ID Settings.
Button
: press this button to take effect.