User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
133
4.9 Advanced Features
On the Access Advanced Features configuration web page, you can view and configure Advanced Features functions of the
Managed PoE+ Switch as the screen in Figure 4-9-1 appears.
Figure 4-9-1: Managed PoE+ Switch Advanced Features Configuration Web Page
Advanced Features Configuration
Item Description
Spanning Tree Protocol
Configure and display Spanning Tree Protocol configuration settings on this web page.
Trunk & Link Aggregation
Configure and display Trunk & Link Aggregation configuration settings on this web page.
IGMP Snooping
Configure and display IGMP Snooping configuration settings on this web page.
MLD Snooping
Configure and display MLD Snooping configuration settings on this web page.
DHCP Relay Agent
Configure and display DHCP Relay Agent configuration settings on this web page.
Loop Detect
Configure and display Loop Detect configuration settings on this web page.
GVRP
Configure and display GVRP configuration settings on this web page.
Neighbor MAC ID Settings
Configure and display Neighbor MAC ID settings on this web page.
Voice VLAN Settings
Configure and display Voice VLAN settings on this web page.
LLDP
Configure and display LLDP configuration settings on this web page.
Table 4-9-1: Descriptions of Advanced Features Configuration