User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
126
The page includes the following fields:
Object Description
• Port Selection Select specific port for Port-MAC-IP Port settings.
• Status
Configure enable or disable the Port-MAC-IP Port setting and default mode is disable.
• Max. Learning
Entry
Configure maximum number of dynamic binding groups for each port, the available
range is
1 to 3
.
• Recovery
Learning Entry
Configure enable or disable the automatically overrides the earliest bound group when
the number of dynamically bound groups reaches the upper limit. The default mode is
disable.
Port Status
• Port
Display per port list.
• State
Display per port current operation mode.
• Max. Learning
Entry
Display per port maximum number of Max. Learning Entry function.
• Recovery
Learning Entry
Display per port current operation mode of Recovery Learning Entry function.
Buttons
: press this button to select all ports.
: press this button to clear all ports selection.
: press this button to take effect.