User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
122
4.7.7 ACL DSCP Settings
This page allows you to configure the ACL DSCP settings for Managed PoE+ Switch as the ACL DSCP settings configuration
screen in Figure 4-7-12 appears.
Figure 4-7-12: ACL DSCP Settings Configuration Page Screenshot
The page includes the following fields:
Object Description
• Index
Configure specific index for ACL DSCP settings; the available range is 1 to 8.
• Value
Configure and indicate per index value of the ACL DSCP setting; the value must be
hexadecimal and available range is 0x0 to 0x3F.
Button
: press this button to take effect.