User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
114
255:255:255:0
255:255:240:0
255.255:0:0
255.0.0.0
240.0.0.0
• Source Port
Configure the Source Port of Low and High.
• Destination Port
Configure the Destination Port of Low and High.
• VID
Configure the VID and the available range is 1-4094.
• CoS
Configure the CoS and the vailable range is 0-7.
• TCP Flag
Configure the TCP Flag and available options are shown below:
URG/0/1
ACK/0/1
PSH/0/1
RST/0/1
SYN/0/1
FIN/0/1
• DSCP
Configure the DSCP and the available range is 0-63.
• IP Protocol
Configure the IP Protocol.
• Ingress Port
Select the specific port as Ingress port.
• Action
Select the action and the available options are shown below:
Drop
Type 1
Type 2
Button
: press this button to take effect.