User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
105
Button
: press this button to take effect.
4.6.7 802.1p-based QoS
This page allows you to configure the 802.1p-based QoS settings for Managed PoE+ Switch as the 802.1p-based QoS screen
in Figure 4-6-7 appears.
Figure 4-6-7: 802.1p-based QoS Configuration Page Screenshot
The page includes the following fields:
Object Description
• Earlier Edition Click to select the Eariler Edition for 802.1p-based QoS.
• 2005 Edition Click to select the 2005 Edition for 802.1p-based QoS.
• Exchange the priority
of 3’b001 for 2005
Edition
Click to select the Exchange the priority of 3’b001 for 2005 Edition for
802.1p-base QoS.
• Priority Field
Display priority field of Q0 to Q7.
• Earlier Edition
Display earlier edition for 802.1p-based QoS.
• 2005 Edition
Display 2005 edition for 802.1p-based QoS.
Button
: press this button to take effect.