User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
102
4.6.4 QoS Out Queue Aging
This page allows you to configure the QoS Out Queue Aging settings for all switch ports as the QoS Out Queue Aging screen in
Figure 4-6-4 appears.
Figure 4-6-4: QoS Out Queue Aging Configuration Page Screenshot
The page includes the following fields:
Object Description
• Out Queue Aging Time
Set Out Queue Aging time and the available range is 0-255.
• Fast Aging Time Enable
Set the conversion unit of aging time from 100ms to 1.638ms.
• Port Selection Select specific port for QoS Out Queue Aging settings.
• Q0 ~ Q7
Enable or disable the QoS Out Queue Aging settings.
• Port No.
Display per port list.
• Q0-Q7
Display per port QoS Out Queue Aging settings.
Button
: press this button to take effect.