User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 PoE Configuration
- 4.4 Basic Configuration
- 4.5 VLAN Configuration
- 4.6 QoS Configuration
- 4.7 ACL Configuration
- 4.8 Security
- 4.9 Advanced Features
- 4.10 Monitoring
- 5. COMMAND LINE INTERFACE
- 6. Command Line Mode
- 7. SWITCH OPERATION
- 8. Power over Ethernet Overview
- 9. TROUBLESHOOTING
- APPENDEX A: Networking Connection
- APPENDIX B: GLOSSARY
User’s Manual of FGSW-Series
100
4.6.2 QoS Group Member
This page allows you to configure the QoS group member for all switch ports as the QoS group member screen in Figure 4-6-2
appears.
Figure 4-6-2: QoS Group Member Configuration Page Screenshot
The page includes the following fields:
Object Description
• Port
Display per port list.
• Group A
Allow assigning specific port to Group A.
• Group B
Allow assigning specific port to Group B.
• Group
Display Group A and Group B.
• Member Port
Display Member Port setting on Group A and Group B.
Button
: press this button to take effect.