Datasheet

FGSD-1008HPS
3
• ARP Inspection discards ARP packets with invalid MAC
address to IP address binding
Management
• IPv4 and IPv6 dual stack management
• Switch management interface
– Web switch management
– Telnet command line interface
– SNMP v1, v2c and v3
• BOOTP and DHCP for IP address assignment
• System maintenance
– Firmware upgrade via HTTP
– Congurationupload/downloadthroughwebinterface
– Hardware-based reset button for system reset to factory
default
• SNTP Network Time Protocol
• Link Layer Discovery Protocol (LLDP)
• Event message logging to remote Syslog server
• PLANET Smart Discovery utility
PoE Schedule for Energy Saving
Besides being used for IP surveillance, the FGSD-1008HPS is certainly applicable
to build any PoE network including VoIP and wireless LAN. Under the trend of
energy saving worldwide and contributing to the environmental protection on the
Earth, the FGSD-1008HPS can effectively control the power supply besides its
capability of giving high watts power. The “PoEschedule” function helps you
to enable or disable PoE power feeding for each PoE port during specified time
intervals and it is a powerful function to help SMBs and enterprises save energy
and budget.
Power
On
Power
On
Power
On
Power
On
6 watts 6 watts 12 watts 12 watts
Total consumption of 36 watts/hr
PoE
PoE PoE
PoE
5PM8AM
Power
Off
Power
Off
Power
Off
Power
On
6 watts 6 watts 12 watts 12 watts
Saves 24 watts/hr during off-business hours
PoE
PoE PoE
PoE
5PM 8AM
Total Saved = 10800 watts/month
PoE
100BASE-TX UTP with PoE
Ethernet Data Transmission Distance Extension
In the “Extended” operation mode, the FGSD-1008HPS operates on a per-port basis at 10Mbps duplex operation but can support PoE power output over a
distance of up to 250 meters overcoming the 100 meters limit on Ethernet UTP cable.
Extend Mode
Power
250 meters (820 feet)
PoE
FGSD-1008HPS
PoE
10BASE-T UTP with PoE
PoE IP Camera
Robust Layer 2 Features
The FGSD-1008HPS can be programmed for advanced switch management functions, such as MultipleSpanningTreeProtocol(MSTP),BPDUltering,
BPDU Guard, dynamic port link aggregation, IGMP/MLDsnooping, DHCP relay agent, loop detection and GVRP, voice VLAN and the LinkLayer
DiscoveryProtocol(LLDP). The Layer 2 protocol included is to help discover basic information about neighboring devices in the local broadcastdomain.
Other features included are the port-based/802.1Q VLAN and Q-in-Q VLAN, Layer 2/4 QoS, port mirroring, broadcast storm control and bandwidth control.
LACPMSTP
Q-in-Q LLDPQoS
MLD
IGMP
L2/L4
Managed Switch
L2/L4
Managed Switch