- Planet WAN Router User's Manual

88
Queue-keyword keyword-value Explain
Fragments NULL Any fragments ip packet
List List-number
Assigns traffic priorities according
to a specified list.
Lt Byte-count
Specifies a less-than count. The priority
level assigned goes into effect when a
packet size is less than the value
entered for the byte-count argument.
Gt Byte-count
Specifies a greater-than count.
The priority level assigned goes into
effect when a packet size exceeds
the value entered for the byte-count
argument.
Tcp Port
Assigns the priority level defined to TCP
segments originating from or destined
to a specified port.
Udp Port
Assigns the priority level defined to
UDP packets originating from or
destined to a specified port.
queue-list list number interface interface type interface number queue number – Establish priority
from a given interface
queue-list list number default queue number – Assigns the queue number for those packets that
doesn’t match any rule in custom queue.
queue-list list number queue queue number limit limit number – specify the max number of packets
allows in each custom queue. The range is start 0 – 1024
queue-list list number queue queue number byte-count byte-count number – specify the size of bytes
per queue.
custom-queue-list list number – Assign custom list to interface
show interface interface type interface number – display the current status of the custom output
show queueing custom - display the status of custom queue list