- Planet WAN Router User's Manual

79
any – match any packets
match input-interface – specify an input interface to match
match class-map class-map name – specify the traffic class as a match criterion.
match ip rtp lower bound of UDP destination prot – configure class-map that use rtp protocol port as
match criterion
match protocol ip [ tcp | upd] tcp/udp port number – specify the class-map that use two different
protocol as match criterion.
policy-map map name – configure the policies for class whose match criteria for a class.
class class-map name – specify the policy criteria
bandwidth [ percent | remaining | 8-2000000 ] – specify the bandwidth for a class that belong to a
policy map
fair-queue – specify the number of dynamic queues
shape [average | max-buffer | peak ] – specify the traffic shaping
queue-limit packets – Specify the maximum number of packets that queue for a traffic class
priority [percent | 8-2000000 ] – specify the guaranteed allow bandwidth in kilo bits or percent for
priority traffic
police [access-group | bps per second bps burst-normal burst-max ] conform-action action
exceed-action action violate-action action – Specify the maximum bandwidth usage by a traffic class.
show policy-map interface interface – display configuration and statistics of the policy that attached to
an interface
show class-map – display all configuration traffic policy
show class-map class-map name – display the information of user-specific traffic policies.
Configuration Example
router# show run
Building configuration ...
service password-encryption
service timestamps debug
!
hostname router
!