- Planet WAN Router User's Manual

29:37.201 CBAC: delete a session table (40235)

29:40.059 CBAC: delete a session table (40232)

29:45.059 CBAC: delete a session table (40230)

29:58.059 CBAC: delete a host session table

29:58.059 CBAC: delete a session table (40236)

5.5 Radius Security (AAA)

AAA (Authentication Authorization Accounting) is the way that allows access to the network server and what

services they are allow using once they have access.

radius-server host ip address of radius server [acc-port | auth-port] – specify the IP address of the

RADIUS server.

radius-server key – specify the key between the access point and RADIUS server

radius-server retransmit – specify the number of times the access point sends the request to server

radius-server timeout – specify the number of seconds that access point waits for a reply to a

RADIUS request before resending the request.

Radius-server deadtime – specify the time that mark as “dead” when RADIUS server fail to respond to

authentication request.

aaa authentication ppp authentication name [local | radius] – specify aaa authentication methods for

use on serial interface and running ppp

aaa accounting network name accounting list start-stop radius – runs start-stop accounting for all

packet service and use radius server.

ppp pap send-username pap username password pap password – enable the remote pap support

for an interface and send the pap authentication request packets.

ppp authentication [chap | pap] – specify the chap or pap authentication on interface

ppp chap hostname – configure the chap hostname

ppp chap password – configure the chap password

ppp compress [predictor | stacker] – configure predictor or stacker compress on the interface

Configuration Example

PAP example

Router 1