- Planet WAN Router User's Manual

34
types of VC, which is permanent virtual circuit (PVC) and switch virtual circuit (SVC). The
different between PVC and SVC is PVC is permanently established connections used for
frequent and consistent data transfers and not use call setup and call clear.
encapsulation x25 [dce | dte] – set the encapsulation style to X.25 type
x25 address – enable the X.21 address
x25 map [Qllc] – Create the mapping from the destination protocol address to X.121 address
x25 check-called-address – check incoming calls address
x25 check-calling-address – check outbound call address
x25 compression [ predictor | stacker ] – enable packet compression for x25
x25 lic – set the low incoming circuit
x25 hic – set the low incoming circuit
x25 ltc – set the low two-way circuit
x25 htc – set the high two-way circuit
x25 loc – set the low outgoing circuit
x25 hoc – set the high outgoing circuit
x25 ips – set the default maximum incoming packet size, default 128bytes
x25 ops – set the default maximum outgoing packet size. Default 128bytes
x25 win – set the default receiving window size
x25 wout – set the default sending window size
x25 modulus – setting X.25 packet number modulo. Either 8 or 128
x25 t20 – set DTE restart request retransmission timer
x25 facility -
Operation Command
Specify CUG (Closed User Group)
X.25 facility facility-number cug
group-number
Input the user facility number in
hexadecimal
X.25 facility byte-string
Perform flow control parameter
negotiation while initiating a call
X.25 facility facility-number packetsize
in-size out-size