- Planet WAN Router User's Manual

ERT_805> ?

disable Turn off privileged commands, enter GUEST user mode

enable Turn on privileged commands

exit Exit from the EXEC

help Description of the interactive help system

logout Exit from the EXEC

pad Open a X.29 PAD connection

ping Send echo messages

ppp Start IETF Point-to-Point Protocol (PPP)

schedule Schedule one task

show Show running system information

telnet Open a telnet connection

traceroute Trace route to destination

tty Print current tty information

ERT_805>

“Tab” is another help key, when user typing a word if from the letters you’ve typed the system

could identify the word you want to type, press the tab key then, the system will complete the

word for you automatically.

3.2 Redisplay Previous command

The system saves the inputted commands in a history table, so that you could input the

command again by it. Just simply press↑key and↓key or ctrl + P or Ctrl + N.

You could verify the commands in the history table by the command show history

3.3 Verify Current Configuration

The system offered two special hotkeys Ctrl-Q and Ctrl-O with which you could verify your

configuration any time. In privilege mode, global configuration mode or port configuration

mode, the system will display the current configuration right now if you press Ctrl-Q as if you’ve

pressed show run. It means that you needn’t go back to privilege mode to verify your

configuration. The hotkey Ctrl-O is available only in port configuration mode. At anywhere even

when typing a command, if you press the hotkey Ctrl-O, the system will show you the

configuration message of the current port, and then you could go on with your command. This

hotkey avoids the condition that when need verifying the configuration message you have to

quit and enter the port configuration mode again and again. When configuring the routing

protocol you could use the hotkey Ctrl-O as well.

ERT_805(config-serial0/0)#

% CONFIGURATION OF CURRENT OPERATING OBJECT

interface serial 0/0

encapsulation ppp

ip address 10.0.0.1 255.255.255.192

crypto map dynmap