Datasheet

Data Sheet

ELA-100

Ethernet Lightning Arrest Box

To prevent Ethernet devices from possible damage caused by surge voltages as a result of lightning strikes, PLANET has released a new Ethernet

Lightning Arrest Box especially made in the current Ethernet environment.

The ELA-100 Ethernet Lightning Arrest Box provides two passive 10 / 100 / 1000Base-T interfaces for connection of two Ethernet devices and one

ground position for earth. The ELA-100 Ethernet Lightning Arrest Box is the ideal solution to preventing damages to Ethernet devices from surge

voltages caused by lightning strikes.

Key Features

• 20 KA lightning surge protection

• Two passive 10/100/1000 Ethernet ports

• One ground position

• Flexibly designed for various Ethernet devices including

PoE

Applications

Outdoor Installation of Ethernet Lightning Arrest Box

When installing the ELA-100 in an outdoor place with shelter, the Ethernet Lightning Arrest Box must be earthed or else the Ethernet Lightning

Arrest Box may get electric shock and damage. Then connect two Ethernet devices to the two passive 10/100/1000Base-T ports (protected port

and un-protected port) of Ethernet Lightning Arrest Box for lightning strike prevention.

95 meters

PoE Switch

PoE IP Camera

Protected LAN

ELA-100

Lightning Arrestor

ELA-100

Lightning Arrestor

IP Camera

Outdoor

Access Point

ELA-100

Ethernet Switch

ELA-100

Protected LAN

PAGE 1
ELA-100 Ethernet Lightning Arrest Box Key Features • 20 KA lightning surge protection • Two passive 10/100/1000 Ethernet ports • One ground position • Flexibly designed for various Ethernet devices including PoE To prevent Ethernet devices from possible damage caused by surge voltages as a result of lightning strikes, PLANET has released a new Ethernet Lightning Arrest Box especially made in the current Ethernet environment.
PAGE 2
ELA-100 Product Specifications Model ELA-100 Ethernet interface 2 passive 10/100/1000 Ethernet ports Ground 1 ground position DC spark-over voltage 230V, ±20% Nominal impulse discharge current ( wave 8/20μs) 20KA Arc Voltage at 1A ~35V Glow to arc transition current ~1A Glow voltage ~200V Dimensions (W x D xH) 65 x 42 x 20mm Weight 80g Operating environment 0~50 degrees C, 5%~90%RH Storage environment -20~70 degrees C, 5%~90%RH Dimensions 64.5 42.3 20.