User's Manual

547
Users Manual of CS-6306R
[intra-prefix][adv-router router-id]
show ipv6 ospf interface
Displays the information about the
OSPFv3 interface.
show ipv6 ospf neighbor
Displays the information about
OSPFv3 neighbors.
show ipv6 ospf route
Displays the routing information about
OSPFv3.
show ipv6 ospf topology
Displays the OSPFv3 topology.
show ipv6 ospf virtual-links
Displays the virtual links of OSPFv3.
debug ipv6 ospf
Monitors all OSPFv3 behaviors.
debug ipv6 ospf events
Monitors the OSPFv3 events.
debug ipv6 ospf ifsm
Monitors the state machine of the
OSPFv3 interface.
debug ipv6 ospf lsa
Monitors related behaviors about
OSPFv3 LSA.
debug ipv6 ospf nfsm
Monitors the state machine of the
OSPFv3 neighbors.
debug ipv6 ospf nsm
Monitors the information of which the
management module notifies
OSPFv3.
debug ipv6 ospf packet
Monitors the OSPFv3 packets.
debug ipv6 ospf route
Monitors the routing information about
OSPFv3.
OSPFv3 Configuration Example 54.4
54.4.1 Example for OSPFv3 Route Learning Settings
OSPFv3 requires switching information among many internal routers, ABR and ASBR. In the minimum
settings, the OSPFv3-based router works under the case that all its parameters take their default values and
there is no authentication.
The following are three configuration examples:
The first example shows the commands for basic OSPFv3 settings.
The second example shows multiple OSPFv3 processes can be set on a router.
The third example shows how to use OSPFv3 to learn routes.
The fourth example shows how to set the OSPFv3 virtual link.
1. Basic OSPFv3 Configuration Example
The following example shows a simple OSPFv3 settings. In this example, you have to activate process 90,
connect Ethernet interface 0 to area 0.0.0.0, distribute RIPng to OSPFv3 and OSPFv3 to RIPng.
ipv6 unicast-routing