User's Manual

542
Users Manual of CS-6306R
simplify the settings, you can make related configuration to enable them to work under the default parameters
without any authentication; if you want to change some parameters, you must guarantee that the parameters
on all routers are identical.
To set OSPFv3, you must perform the following tasks. Except that the task of activating OSPFv3 is mandatory,
other settings are optional.
 Enabling OSPFv3
 Setting the parameters of the OSPFv3 interface
 Setting OSPFv3 on different physical networks
 Setting the parameters of the OSPFv3 domain
 Configuring the NSSA Domain of OSPFv3
 Setting the Route Summary in the OSPFv3 Domain
 Setting the Summary of the Forwarded Routes
 Generating a Default Route
 Choosing the route ID on the loopback interface
 Setting the management distance of OSPFv3
 Setting the Timer of Routing Algorithm
 Monitoring and Maintaining OSPFv3
OSPFv3 Configuration Tasks 54.3
54.3.1 Enabling OSPFv3
Before OSPFv3 is enabled, the function to forward the IPv6 packets must be enabled.
Run the following commands in global configuration mode:
Command Purpose
router ospfv3process-id
Activates OSPFv3 and enters the
router configuration mode.
router-idrouter-id
Sets the router ID of a router on which
OSPFv3 is running.
Run the following command in interface configuration mode:
Command Purpose
ipv6 ospf process-id area area-id
[instance instance-id]
Enables OSPFv3 on an interface.
If the OSPFv3 process is still not created before OSPFv3 is enabled on an
interface, the OSPFv3 process will be automatically created.