Quick Guide
8
Step 3 After the brackets are attached to the CS-6306R, use suitable screws to
securelyattachthebracketstotherack,asshowninFigure3-2.
Please make sure the device does not slip through your grasp,
or else it may cause damage to the device or may even hurt the
installer.
The handles are designed for sliding into cabinet only; please don’t
use handles to lift the Chassis Switch.
Console
9600, N, 8, 1
Console
Figure 3-2 Mounting the CS-6306R in a Rack
3.3 Chassis Switch Grounding
A good grounding system is the groundwork for the smooth and safe operation
of the CS-6306R, and an excellent way to prevent lightning strikes and resistance
interference. Please follow theCS-6306R grounding specicationinstructions, verify
the installation site’s grounding condition and ensure proper grounding accordingly.
Proper Grounding
When using an AC power source, the device must be grounded with the green
and yellow ground cables; otherwise, shock hazards may occur when insulation
resistance between the internal power supply and the chassis degrades.