Quick Guide

6
3. Hardware Installation
During the installation and use of the CS-6306R Chassis Switch, please follow the
steps below:
1. Chassis Switch Mounting
 Desktop installation
 Rack-mounting installation
2. Chassis Switch grounding
3. Modules installation
4. Removing and installing the dust gauze
5. Removing and installing the fan tray
6. Remover and installing the power supply
3.1 Desktop Installation
Toavoiddamage,donotplaceanyweightontheCS-6306R.
Maximum weight of various modules installed is 30kg and full
configuration weight is 30kg.
The Chassis Switch is very heavy, so carry and install it by two
people to avoid injury.
ToinstalltheCS-6306Ronadesktoporshelf,simplycompletethefollowingsteps:
Step 1 Choose a smooth level workbench.
Step 2 Verify that the workbench is strong enough to support the CS-6306R’s
fullyconguredweight.
Step 3 Plan a good position for your CS-6306R that is, to easily operate and
have an appropriate power source and grounding point.
Step 4 Place the CS-6306R safely on the workbench; avoid obstructions on any
side of the Chassis Switch.