Quick Guide

19
6.2 ConguringIPAddress
 Management Port
The IP address conguration commands for Management module interfaces are
listed below:
Switch# enable
Switch# cong
Switch_cong#interface gigaEthernet 5/0
Switch_cong_g5/0#ip address 192.168.1.1 255.255.255.0
The previous command would apply the follow settings for the Chassis Switch.
IPv4 Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Figure 6-4 Conguring IPv4 Address Screen
InterfaceVLAN1
The Switch Module interface default setting is in the disable mode.
To login and manage the Chassis Switch through the switch
module,enablinginterfacesonswitchmoduleisrequired.
Thecongurationcommandsareasfollows:
Switch#cong
Switch_cong#interface vlan 1
Switch_cong_v1#ip address 192.168.0.100 255.255.255.0