Quick Guide

17
6. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer and to serial (console) port of the CS-6306R Chassis Switch.
Theconsole port oftheChassisSwitchis DCEalready,sothatyoucan connectthe
consoleportdirectlythroughPCwithouttheneedofNullModem.
Chassis Switch
PC / Workstation with
Terminal Emulation Software
Serial Port
RJ45 to DB9 RS232 Cable
RJ45 Type Serial Port
9600, N, 8, 1
Console
9600, N, 8, 1
Figure 6-1 CS-6306R Chassis Switch Console Connection
A terminal program is required to make the software connection to the CS-6306R
Chassis Switch. Putty or Tera Term may be a good choice.
1. Run terminal program Tera Term on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
 Baud Rate: 9600
 Data Bits: 8
 Parity:None
 Stop: 1
 FlowControl:None
Figure 6-2 COM Port Conguration