Quick Guide

12
3.6 Removing and Installing the Fan Tray
One fan tray in the right section of the CS-6306R can be serviced from the front.
The installation and removal of the fan tray is relatively simple. Please refer to the
following procedure for reference.
Removing the Fan Tray
Step 1 Loosen the 2 screws on the front panel of the fan tray.
Step 2 Hold the handle on the front panel of the fan tray with your middle and
ring ngers, press the locker slightly down, and the fan tray can be
drawn out smoothly.
Installing the Fan Tray
Step 1 Just hold the fan tray in the correct direction, and align with the
corresponding slot and push to secure.
Step 2 Tighten the panel fasteners on the front panel.
The installation and removal of a fan tray is shown below:
Figure 3-5 Installation and Removal of the Fan Tray