Datasheet
3
CS-6306R
– SSHv2, SSLv3, TLSv1.2 and SNMP v3 secure access
• SNMP Management
– Four RMON groups (history, statistics, alarms, and events)
– SNMP trap for interface Link Up and Link Down notication
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP
– Reset button for system reboot
– Dual images
• DHCP Functions:
– DHCP Relay
– DHCP Option 82
– DHCP Server
• User Privilege levels control
• Network Time Protocol (NTP) and SNTP
• Network Diagnostic
– SFP-DDM (Digital Diagnostic Monitor)
– ICMP remote IP ping
• Syslog remote alarm
• System Log
Stacking Management
• Virtualized multiple CS-6306R switches integrated into one
logical device
• Single IP address stack management, supporting up to 2
hardware units stacked together
• Stacking architecture supports redundancy Ring mode
technology into customer’s network to enhance system reliability and uptime. In a
certain simple Ring network, the recovery time could be less than 50ms to quickly
bring the network back to normal operation.
Centralized Hardware Stacking Management
Several CS-6306R Chassis Ethernet Switches can be used to build a virtually
logical facility. The CS-6306R gives the enterprises, service providers and telecoms
flexible control over port density, uplinks and switch stack performance. The CS-
6306R can connect as a ring for redundancy and ensures that data integrity is
retained even if one switch in the stack fails. You can even hot-swap switches
without disrupting the network, which greatly simplifies the tasks of upgrading the
LAN for catering to increasing bandwidth demands.
Powerful Security from Layer 2 to Layer 4
The CS-6306R offers comprehensive Layer 2 to Layer 4 Access Control List (ACL)
for enforcing security to the edge. It can be used to restrict network access by
denying packets based on source and destination IP address, TCP/UDP ports
or defined typical network applications. Its protection mechanism also comprises
802.1x port-based and MAC-based user and device authentication. With the private
VLAN function, communication between edge ports can be prevented to ensure
user privacy.
Advanced IP Network Protection
The CS-6306R also provides DHCP Snooping, IP Source Guard and Dynamic
ARP Inspection functions to prevent from IP snooping attack and discard ARP
packets with invalid MAC address. The network administrators can now construct
highly-secure corporate networks with considerably less time and effort than before.
Enhanced Quality of Service
The CS-6306R Switch fully supports DiffServ module, so users can specify a
queue bandwidth on each port. WRR/SP/SWRR scheduling is also provided. The
CS-6306R supports the port security to enable trusted CoS, DSCP, IP precedence
and port priority. Users can modify packets’ DSCP and COS values so that the
trafc can be classied by port, VLAN, DSCP, IP precedence and ACL table. User
can also modify packets’ DSCP and IP precedence values to specify different
bandwidths for voice, data and video to customize different qualities of service.
Efcient and Secure Management
For efficient management, the CS-6306R is equipped with console, Web and
SNMP management interfaces.
■ With the built-in Web-based management interface, the CS-6306R offers an
easy-to-use, platform-independent management and conguration facility.
■ For text-based management, it can be accessed via Telnet and the console
port. For reducing product learning time, the CS-6306R offers Cisco-like
command via Telnet or console port and customer doesn’t need to learn new
command from these switches