Quick Guide

9
PWR Alarm
Red
Lights to indicate that the power supply of the system is
abnormal.
O
Ifthered indicatoriso,thepower supplyofthe system
is normal.
Host
Green
Lights to indicate that the MCU is in the master control
state.
O
If the green indicator is o, the MCU is in a non-master
state.
z Button Description
LED Function
Reset Reset button; reset the single board
Hot Swap
When two CS6-MCU modules are used, one operates in the
Master status and the other operates in the Slave status. Press the
master button on the MCU module to operate in the Master status,
and the system’s Swap LED will be lit, meaning the MCU module
can be hot swappable.
CS6-MCU
MGMT
Hot-swap Reset
PWR
Alarm
FAN
Alarm
SYS
Host Hot-swap
PWR
Figure 3-2 CS6-MCU LED Panel