Quick Guide
13
Provides one debugging serial port for single board debugging, which is not
open for the clients.
LEDs
The front panel LEDs indicate instant status of port links, data activity, system
operation and system power. The system helps to monitor and troubleshoot when
needed. Figure 4-4 shows the front panel of the Standard Chassis Switch Module.
CS6-S24T8X LED Indication
CS6-S24T8X
Console
9600, N, 8, 1
Alarm
SYS
T4 T8
T3 T7
T2 T6
T1 T5
T7
T8
Figure 4-4 CS6-S24T8X LED Panel
z System
LED Color Function
ALM
Green Lights to indicate an alarm occurs in the single board.
O To indicate the Chassis Switch Module runs normally.
SYS Green If the green indicator ickers, the module runs normally.
z 10/100/1000BASE-T Interfaces
LED Color Function
LNK/
ACT
Green
Lights to indicate the link through that port is successfully
established with speed 10/100/1000Mbps. The port is in the
“up” state.
Blinks to indicate that the Management Module is actively sending
or receiving data over that port.
O
Ifthe greenindicatoris o,the portis inthe“down” (notworking)
state.
z 1G/10GBASE-X SFP+ Interfaces
LED Color Function
LNK/
ACT
Green
Lights to indicate the link through that port is successfully
established with speed 1G/10GMbps. The port is in the “up” state.
Blinks to indicate that the Management Module is actively sending
or receiving data over that port.
O
Ifthe greenindicatoris o,the portis inthe“down” (notworking)
state.