Quick Guide

21
6.3 Telnet Management
Log in to the Telnet conguration interface. The commands used in the Telnet CLI
interface after login is the same as that in the Console interface.
DefaultIPAddress:192.168.1.1
Username: admin
Password: admin
Figure 6-7 Telnet Conguration Interface
6.4 SavingtheConguration
In Chassis Switch, the running conguration le stores in the RAM. In the current
version, the running conguration sequence running-cong can be saved from the
RAM to FLASH by write command, so that the running conguration sequence
becomesthestartupcongurationle,whichiscalledcongurationsave.
Switch# write all
Figure 6-8 Copying Running-cong Startup-cong Screen