Quick Guide

20
The previous command would apply the following settings for the CS-6306R.
IPv4 Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Figure 6-5 Conguring IPv4 Address of Interface VLAN 1 Screen
TocheckthecurrentIPaddressormodifyanewIPaddressfortheChassisSwitch,
please use the procedure as follows:
Show the current IP address
1.On“Switch#”prompt,enter“show ip interface brief”.
2.ThescreendisplaysthecurrentIP address, Subnet Mask and Gatewayasshown
in Figure 6-6.
Figure 6-6 Show IP Information Screen
If the IP address is successfully congured, the Chassis Switch will apply the new
IP address setting immediately. You can access the Web interface of the CS-6306R
Chassis Switch through the new IP address.
If you are not familiar with console command or the related param-
eter,enter“help”anytimeinconsoletogetthehelpdescription.