Quick Guide

15
4. Chassis Switch Management
To set up the Chassis Switch, the user needs to congure the Chassis Switch for
network management. The Chassis Switch provides two management options:
Out-of-Band management and In-Band management.
 Out-of-Band Management
Out-of-band management is the management through Console interface.
 In-Band Management
In-band management refers to the management by logging to the Chassis Switch
using Telnet, HTTP, or using SNMP management software to congure the
Chassis Switch. In-band management enables the management of the Chassis
Switch to attach some devices to the Switch. The following procedure is required to
enable In-band management:
1. Logging on to console
2.Assigning/ConguringIPaddres
3. Creating a remote login account
4.EnablingHTTPorTelnetserverontheManagedSwitch
If in-band management fails, due to Chassis Switch conguration changes, out-of-
bandmanagementcanbeusedforconguringandmanagingtheChassisSwitch.
The Chassis Switch is shipped with Management Port IP address
192.168.1.1/24 assigned and VLAN 1 interface IP address
192.168.0.100/24 assigned by default. User can assign another
IP address to the Chassis Switch via the Console interface to be
able to remotely access the Chassis Switch through Telnet or HTTP.