User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
72
4.6.1 PoE Configuration
This section provides PoE (Power over Ethernet) Configuration and PoE output status of Renewable Energy
Switch as screen in Figure 4-6-2 appears. Table 4-6-1 describes the PoE Configuration object of Renewable
Energy Switch.
Figure 4-6-2: PoE Configuration Web Page Screen
Object Description
System PoE Admin Mode
Allows user to disable / enable PoE function.
Power Supply
Displays PoE power supply status.
Power Limit Mode
Allows user to configure power limit mode, which can be chosen.
Consumption: Based on the real device power consumption where PoE
power is delivered as system default setting is in this mode.
Allocation: Users allow to assign how much PoE power to each port and
the system will reserve PoE power to PD.
PoE Temperature
Displays the current PoE temperature of Renewable Energy Switch.
Power Allocation
Displays the current total power consumption status.
Description
This function provides input per port description and the available letters is
30.
NOTE: The total maximum letters are only 800. Some of special words will
count as 5 per word, like ‘, “, \, < and >.
PoE Function
Allows user to disable or enable per port PoE function, also allow choose
schedule for enable PoE Schedule function of each port.
Schedule
Indicates the scheduled profile mode. Possible profiles are: