User Manual
Table Of Contents
Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
69
Low Voltage Disconnection / Low Voltage Reconnection
When the battery voltage is lower than the value for the low‐voltage disconnection (LVD), the controller will
stop supplying power to the load. It requires the charging from the PV panel so as to increase the battery
voltage to be above the value for low‐voltage reconnection (LVR) and thus the PoE device can be recovered
as the screen in Figure 4-5-2 appears.
Figure 4-5-2 Low Voltage Disconnection / Low Voltage Reconnection