User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
66
Figure 4-4-21 QoS Setup Web Page Screen
Object Description
Enable QoS
Check the box to enable the QoS function.
Automatic Uplink Speed
Check the box to adjust the uplink speed automatically by the
Renewable Energy Switch. Or enter the uplink data rate manually in the
field below.
Automatic Downlink Speed
Check the box to adjust the downlink speed automatically by the
Renewable Energy Switch. Or enter the downlink data rate manually in
the field below.
QoS Rule Setting
To set the priority rule, you can appoint the computer by IP address or
MAC address, and enter it in the correct field. Select minimum or
maximum bandwidth, and then fill the uplink and downlink data rate
into the field.
Table 4-4-14: Descriptions of the QoS Objects