User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
65
4.4.5.3 Route table
Choose menu “Routing Table”, and you can check all of the valid route entries in use as the screen in Figure
4-4-20 appears. The Destination IP address, Gateway, Genmask, Interface and Type will be displayed for
each entry. Click the Refresh button to refresh the data displayed.
Figure 4-4-20 Route table Web Page Screen
4.4.6 QoS (Quality of Service)
The QoS (Quality of Service) helps improve your network gaming performance by prioritizing applications as
the screen in Figure 4-4-21 appears. Table 4-4-14 describes the QoS Objects Screen of Renewable Energy
Switch. By default the bandwidth control are disabled and application priority is not classified automatically. In
order to complete this settings, please follow the steps below.
(1) Enable this function.
(2) Enter the total speed or choose automatic mode.
(3) Enter the IP address or MAC address user want to control.
(4) Specify how to control this PC with this IP address or MAC address, including maximum or minimum
bandwidth, priority and its up/down speed.
After the configuration, please click the “Apply” button to save the settings.