User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
64
Figure 4-4-19 appears. The destination IP address and subnet mask determine a destination network or host
to which the router sends packets through the gateway. Table 4-4-13 describes the Dynamic Route Objects
Screen of Renewable Energy Switch.
Figure 4-4-19 Static Route Setup Web Page Screen
Object Description
Enable Static Route
Click this box to enable static route.
IP Address
The network or host IP address desired to access.
Subnet Mask
The subnet mask of destination IP.
Gateway
The gateway is the router or host’s IP address to which packet was sent.
It must be the same network segment with the WAN or LAN port.
Table 4-4-13: Descriptions of the Static Route Objects