User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
61
4.4.4.4 IP Filtering
IP Filtering is used to block internet or network access to specific IP addresses on your local network as the
screen in Figure 4-4-15 appears. The restricted user may still be able to login to the network but will not be
able to access the internet. To begin blocking access to an IP address, enable IP Filtering and enter the IP
address of the user you wish to block. Table 4-4-10 describes the IP Filtering Objects Screen of Renewable
Energy Switch.
Choose menu “Security Setup  IP Filter”, and you can configure which IP address and protocol to be
restricted. After the configuration, please click the “Apply” button to save the settings.
Figure 4-4-15 IP Filtering Setup Web Page Screen
Object Description
Enable IP Filtering
Check this box to enable IP Filter function
Local IP Address
Add LAN IP address you want to control
Protocol
Select the port number protocol type (TCP, UDP or both).
If you are unsure, then leave it to the default both protocol
Comment
The description of this setting
Table 4-4-10: Descriptions of the IP Filtering Objects