User Manual

Table Of Contents

Industrial Renewable Energy 4-Port 10/100/1000T

802.3at PoE+ Managed Ethernet Switch

BSP-360

4.4.4 Security

The Security Setup contains submenus of the settings about firewall and access filtering. Please refer to the

following sections for the details as Figure 4-4-11 is shown below:

Figure 4-4-11: Security Setup Menu

4.4.4.1 Port Filtering

Entries in this table are used to restrict certain types of data packets from your local network to Internet

through the Gateway. Use of such filters can be helpful in securing or restricting your local network as the

screen in Figure 4-4-12 appears. Table 4-4-7 describes the Port Filtering Objects Screen of Renewable

Energy Switch.

Choose menu “Security Setup  Port Filter”, and you can configure which port range and protocol to be

restricted. After the configuration, please click the “Apply” button to save the settings.

Figure 4-4-12 Port Filtering Setup Web Page Screen

Object Description

Enable Port Filtering

Enable Port Filtering function.