User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
57
Object Description
Protocol
Select the port number protocol type (TCP, UDP or both). If you are
unsure, then leave it to the default both protocols.
Port Range
Add ports you want to control. For TCP and UDP Services, enter the
beginning of the range of port numbers used by the service. If the service
uses a single port number, enter it in both the start and finish fields.
Comment
The description of this setting.
Table 4-4-5: Descriptions of the Port Forwarding Objects
4.4.3.2 DMZ
A Demilitarized Zone is used to provide Internet services without sacrificing unauthorized access to its local
private network as the screen in Figure 4-4-10 appears. Table 4-4-6 describes the DMZ Objects Screen of
Renewable Energy Switch. Typically, the DMZ host contains devices accessible to Internet traffic, such as
Web (HTTP) servers, FTP servers, SMTP (e-mail) servers and DNS servers.
Choose menu “Service Setup  DMZ”, and you can configure the private IP address of DMZ. The DMZ
feature allows one local host to be exposed to the Internet for a special-purpose service such as Internet
gaming or video conferencing. After the configuration, please click the “Apply” button to save the settings.
Figure 4-4-10 DMZ Setup Web Page Screen
Object Description
Enable DMZ
Check the box to enable DMZ function. If the DMZ Host Function is
enabled, it means that you set up DMZ host at a particular computer to
be exposed to the Internet so that some applications/software, especially
Internet / online game can have two way connections.
DMZ Host IP Address
Enter the IP address of a particular host in your LAN which will receive all
the packets originally going to the WAN port / Public IP address above.
Table 4-4-6: Descriptions of the DMZ Objects