User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
56
4.4.3 Server
You can configure Port Forwarding and DMZ here as Figure 4-4-8 is shown below:
Figure 4-4-8: Server Setup Menu
4.4.3.1 Port Forwarding
Entries in this table allow you to automatically redirect common network services to a specific machine behind
the NAT firewall as the screen in Figure 4-4-9 appears. Table 4-4-5 describes the Port Forwarding Objects
Screen of Renewable Energy Switch. These settings are only necessary if you wish to host some sort of
server like a web server or mail server on the private local network behind your Gateway's NAT firewall.
Choose menu “Service Setup  Port Forwarding”, and you can configure to re-direct a particular range of
service port numbers from the Internet network to a particular LAN IP address. It helps users to host some
servers behind the firewall. After the configuration, please click the “Apply” button to save the settings.
Figure 4-4-9 Port Forwarding Setup Web Page Screen
Object Description
Enable Port Forwarding
Enable Port Forwarding function
IP Address
Add LAN IP address of specified host or server on the private local
network.