User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
52
Object Description
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet Mask.
Server IP Address
Enter the L2TP Server IP address provided by your ISP.
User Name
Enter your L2TP user name.
Password
Enter your L2TP password.
Host Name
This option specifies the Host Name of the Renewable Energy Switch.
MTU Size
The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1492 Bytes. It is not recommended that you change the
default MTU Size unless required by your ISP.
Attain DNS Automatically
Select “Attain DNS Automatically”, the DNS servers will be assigned
dynamically from your ISP.
Set DNS Manually
If your ISP gives you one or two DNS addresses, select Set DNS
Manually and enter the primary and secondary addresses into the correct
fields.
Enable uPnP
Check the box to enable the uPnP function.
Enable IGMP Proxy
Check the box to enable the IGMP Proxy function.
Enable Ping Access on
WAN
Check the box to enable Ping access from the Internet Network.
Enable Web Server Access
on WAN
Check the box to enable the web server access of the Renewable Energy
Switch from the Internet network.
Enable IPSec pass through
on VPN connection
Check the box to enable IPSec pass through function on VPN connection.
Enable PPTP pass through
on VPN connection
Check the box to enable PPTP pass through function on VPN connection.
Enable L2TP pass through
on VPN connection
Check the box to enable L2TP pass through function on VPN connection.
Enable IPv6 pass through
on VPN connection
Check the box to enable IPv6 pass through function on VPN connection.
Table 4-4-2: Descriptions of the WAN Objects