User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
44
Object Description
occurs every 3 seconds.
Refresh
Press this button to refresh current Web page.
Clear
Press this button to clear system log information.
Table 4-3-3: Descriptions of the System Log Objects
4.3.2 Operation Mode
This section provides the current operation mode, and users can set different modes to LAN and WLAN
interface for NAT and bridging function on Renewable Energy Switch as the screen in Figure 4-3-6 appears.
Table 4-3-4 describes the Operation Mode of Renewable Energy Switch.
Figure 4-3-6: Operation Mode Web Page Screen
Object Description
Gateway
In this mode, the device enables multiusers to share Internet via
ADSL/Cable Modem. The wireless port shares the same IP to ISP
through Ethernet WAN port. The Wireless port acts the same as a LAN
port while at AP Router mode.
Bridge
In this mode, the device can be used to combine multiple local networks
together to the same one via wireless connections, especially for a home
or office where separated networks can't be connected easily together
with a cable.
Table 4-3-4: Descriptions of the IP Configuration Objects