User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
36
After setup is completed, press the “Update Device”, “Update Multi” or “Update All” button to take effect.
The definitions of the 3 buttons above are shown below:
Update Device: Use current setting on one single device.
Update Multi: Use current setting on multi-devices.
Update All: Use current setting on whole devices in the list.
The same functions mentioned above also can be found in “Option” tools bar.
By clicking the “Control Packet Force Broadcast” function, it allows you to assign new setting value to the
Ultra PoE Managed Injector Hub under a different IP subnet address.
Press the “Connect to Device” button and then the Web login screen appears in Figure 3-3-2.
Press the “Exit” button to shut down Planet Smart Discovery Utility.