User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
27
One Powered Device
Two Powered Devices
Install the terminal block on the BSP-360.
The voltage of DC out is based on the battery voltage and the maximum DC out from
the BSP-360 is 24VDC, 1A.
The wire gauge for the terminal block should be in the range from 14 to 24 AWG.
The external device should also be grounded properly.
Please ensure the output voltage is correct for remote device. Otherwise, it will damage
your remote device.