User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
16
Battery Charging Characteristics
Charge Algorithm
Bulk charge (constant current), Absorption charge (constant voltage)
and Floating charge. Absorption and Floating charge with PWM
protection.
Maximum Output Current 6A
Nickel-cadmium Battery
± 40 mV/degrees Celsius for NiCad type batteries; charge cut-off @ 55
degrees C
(Temperature compensation baseline@ 25 degrees C)
Lead Acid Battery
(Default Setting)
± 60 mV/degrees Celsius for lead acid type batteries; charge cut-off @
55 degrees C
(Temperature compensation baseline@ 25 degrees C)
Float Charge Voltage DC 27.2V (26.0~30.0V)
Absorption Charge Voltage DC 29.2V (28.0~32.0V)
LVD (Low Voltage Disconnection) DC 22.2V (21.0~25.0V)
LVR (Low Voltage Reconnection) DC 24.8V (23.0~27.0V)
Router Features
Internet Connection Type
Shares data and Internet access
with users, supporting the following
internet accesses:
 PPPoE
 Dynamic IP
 Static IP
 PPTP
 L2TP
Firewall
NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Port Forwarding, and DMZ
Built-in firewall with IP address/MAC address/Port/ URL filtering
Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-
FLOOD filter, DoS
protection
Routing Protocol Static/Dynamic (RIP1 and 2) routing
VPN Pass-through PPTP, L2TP, IPSec, IPv6
LAN
Built-in DHCP server supporting static IP address distribution
Supports UPnP, Dynamic DNS
Supports IGMP Proxy
Supports 802.1d STP (Spanning Tree)
IP/MAC-based bandwidth control
Management
Management Interface Setup of system/management functions