User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
14
1.5 Product Specifications
Product BSP-360
Hardware Specifications
Copper Ports
LAN: 5 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port-1 to Port-5,
bridge mode)
WAN: 1 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port-
5, gateway
mode)
PoE Injector Port 4 ports with 802.3af/802.3at PoE injector function (Port-1 to Port-4)
USB 1 USB Type A female for setting backup
Power Output
4 PoE out 52VDC; max. 30 watts per PoE port
1 DC out 24@ 1A maximum (four-pin terminal block)
* The voltage of DC out is based on the battery.
Switch Architecture Store-and-Forward
Switch Fabric 10Gbps/non-blocking
Switch Throughput@64 bytes 5.95Mpps@64 bytes
MAC Address Table 8K entries
Shared Data Buffer 512Kbit
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
LED
3 LEDs for System and Power:
 Green: Power
 Green: Fault
 Green: System
4 LEDs for PoE Copper Ports (Port-1~Port-4):
 Green: LNK/ACT
 Orange: PoE-in-use
1 LED for 10/100/1000T Copper Port (Port-5):
 Green: LNK/ACT
3 LEDs for PoE Power Usage (W)
 Green: 50, 100 and 120W
Connector Removable 6-pin terminal block
Pin 1/2 for PV panel; Pin 3/4 for alarm; Pin 5/6 for battery
Alarm 1 Digital Output (DO):