User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
13
 Supports -10 to 60 degrees C operating temperature
 Supports ESD 6KV DC Ethernet protection
 Redundant power design
– 24V~45V DC wide power input
 Switching
 Hardware based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto
MDI/MDI-X
 Features Store-and-Forward mode with wire-speed filtering and forwarding rates
 IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
 8K MAC address table size
 Automatic address learning and address aging
 Router
 Internet types: Dynamic IP, static IP, PPPoE, L2TP, PPTP
 Static and dynamic (RIP1 and 2) routing
 IP/MAC-based bandwidth control
 Supports Port Forwarding, DMZ, UPnP and Dynamic DNS for various networking applications
 802.1d STP and IGMP Proxy
 Security
 Port filtering lets you either allow or prevent which applications can access the Internet.
 MAC filtering allows you to include or exclude computers and devices based on their MAC address
 URL filtering allows you to control access to Internet websites in an URL list
 IP source guard prevents IP spoofing attacks
 DoS attack prevention
 Security
 Switch Management Interface
– IPv4 Web switch management
– SNMP v1, v2c
 Static and DHCP for IP address assignment
 System Maintenance
– Firmware upload/download via HTTP
– Configuration upload/download through HTTP
– Hardware reset button for system reboot or reset to factory default
 NTP Network Time Protocol
 SNMP trap for interface Link Up and Link Down notification
 Event message logging to remote syslog server
 PLANET Smart Discovery Utility