User Manual

Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch
BSP-360
12
1.4 Product Features
 Physical Port
 5-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE Injector (Port 1
to Port 4)
 RJ45 type interface for basic management and setup
 USB type A female for setting file backup and restore
 Power over Ethernet
 Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
 Backward compatible with IEEE 802.3af Power over Ethernet
 Up to 4 ports of IEEE 802.3af/802.3at devices powered
 Supports PoE power up to 30 watts for each PoE port
 Auto detects powered device (PD)
 Circuit protection prevents power interference between ports
 Remote power feeding up to 100 meters
 PoE management
– Total PoE power budget control
– Per port PoE function enable/disable
– PoE port power feeding priority
– Per PoE port power limitation
– PD alive-check
– PoE schedule
 Battery Management
 Battery type option: Nickel-cadmium battery or lead-acid battery
 Easy diagnostic of the system operating status via LED indicator
 Battery current usage and status
 Battery capacity and power consumption statistics
 Low voltage cut-off protection: Send alert and cut off the low priority PoE port for the low power
battery
 Pulse Width Modulation (PWM) Protection
– Reverse current protection to prevent the current circuits from flowing back to the PV panel
– Over-current and over-temperature protection
– Reverse polarity protection (for battery and charging electrodes)
 Industrial Case & Installation
 IP30 aluminum case
 DIN-rail and wall-mounted design