Manualshelf

Quick Guide

ManualsBrandsPLANET Technology ManualsManaged PoE SwitchIndustrial Renewable Power 5-Port Gigabit Managed Switch/Router with 4-Port 802.3at PoE+
11121314151617181920
14
Step 5. Wiring the DC Outputs
Please follow the steps below to insert the power wires for DC power required
equipment.
1. Please nd the terminal block connector with two DC power outputs shown
below:
V1+
V2+
V1-
V2-
2. Insert the Positive and Negative DC wires into the V+ and V- terminals,
respectively; Terminals 1 and 3 for Power 1, and Terminals 2 and 4 for Power 2.
3. Connect the other points of DC power wires to the power devices. Tighten the
wire-clamp screws for preventing the wires from loosening.
V1+
Reset
V2+
DC Ouput: 24V , 2A max.
Maximum Output 48 Watts
Powered
Device
1
V1+
V2+
V1-
V2-
One Powered Device
V1+
Reset
V2+
DC Ouput: 24V , 2A max.
Total Maximum
Output 48 Watts
Powered
Device
Powered
Device
1
2
V1+
V2+
V1-
V2-
Two Powered Devices