Datasheet

BSP-360
8
Specications
Product
BSP-360
HardwareSpecications
Copper Ports
LAN: 5 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 1 to Port 5, bridge mode)
WAN: 1 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 5, gateway mode)
PoE Injector Port 4 ports with 802.3af/802.3at PoE injector function (Port 1 to Port 4)
USB 1 USB Type A female for setting backup
Power Output
4 PoE out 51VDC; max. 36 watts per PoE port
2 DC out 24@ 2A maximum (four-pin terminal block)
* The voltage of DC out is based on the battery.
Switch Architecture Store-and-Forward
Switch Fabric 10Gbps/non-blocking
Switch Throughput@64 bytes 5.95Mpps@64 bytes
MAC Address Table 8K entries
Shared Data Buffer 512Kbit
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Reset Button
< 5 sec: System reboot
> 10 sec: Factory default
LED Indicators
3 LEDs for System and Power:
- Green: Power
- Red: Alarm
- Green: PV System
4 LEDs for PoE Copper Ports (Port 1~Port 4):
- Green: LNK/ACT
- Amber: PoE-in-use
1 LED for 10/100/1000T Copper Port (Port 5):
- Green: LNK/ACT
3 LEDs for PoE Power Usage (W)
- Amber: 50, 100 and 120W
Connector
Removable 6-pin terminal block
Pin 1/2 for PV panel; Pin 3/4 for alarm; Pin 5/6 for battery
Alarm
1 digital output (DO):
Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Open collector to 24V DC, 100mA max.
Power Requirements
PV in: 24~45V DC
Battery in/out: 24V DC
Power Consumption/ Dissipation
5.04 watts, 17.1BTU (Standby without PoE function)
6.96 watts, 23.7 BTU (Full loading without PoE function)
135.36 watts, 461.5 BTU (Full loading with PoE function)
Dimensions (W x D x H) 89 x 107 x 152 mm
Weight 1251g
ESD Protection 6KV DC
Enclosure IP30 aluminum case
Installation DIN-rail kit and wall-mount ear
Power over Ethernet
PoE Standard IEEE 802.3af/802.3at Power over Ethernet PSE
PoE Power Supply Type End-span
PoE Power Output
Per port 51V DC, 275mA. Max. 15.4 watts (IEEE 802.3af)
Per port 51V DC, 535mA. Max. 36 watts (IEEE 802.3at)
Power Pin Assignment 1/2 (+), 3/6 (-)
PoE Power Budget 120 watts (PoE consumption + DC out and depending on power input)
Max. Number of Class 2 PDs 4
Max. Number of Class 3 PDs 4
Max. Number of Class 4 PDs 4
Renewable Power Input (PV IN)
Min. Voltage 24V (Suggest > 30V for fully charge to battery)
Max. Voltage 45V
Max. Current < 8.8A
Max. Power < 400W