Manualshelf

Datasheet

ManualsBrandsPLANET Technology ManualsManaged PoE SwitchIndustrial Renewable Power 5-Port Gigabit Managed Switch/Router with 4-Port 802.3at PoE+
12345678910
BSP-360
1
Industrial Renewable Power 5-Port Gigabit
Managed Switch/Router with 4-Port 802.3at PoE+
Industry-leading Integration of PoE Technology and Renewable Power System
PLANET’s newly-launched Renewable Energy Industrial 802.3at PoE Managed
Ethernet Switch, BSP-360, is designed for deploying a surveillance or wireless network
and remotely monitoring and managing the IP-based devices. Based on its green
technology, the BSP-360 can be charged by the inexhaustible and natural source
of energy, such as solar, wind and hydroelectric power to conserve energy so as to
economically power these remote IP cameras and wireless APs, especially used for
such expansive applications as dams, forests, deserts, national parks, nature/animal
protection areas and highways.
PLANET NMS-360 Network Management Controller can centrally manage up to 512
BSP-360 units and 2,048 PLANET IP cameras via MQTT and ONVIF Protocols.
(Please regularly check PLANET website for the latest compatibility list of managed
devices.)
Physical Port
• 5-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port
IEEE 802.3at/af PoE injector function (Port 1 to Port 4)
• RJ45 type interface for basic management and setup
• USBtypeAfemaleforsettinglebackupandrestoration
Power over Ethernet
• Complies with IEEE 802.3at Power over Ethernet Plus
end-span PSE
• Backward compatible with IEEE 802.3af Power over
Ethernet
• Up to 4 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100 meters
• PoE management
– Total PoE power budget control
– Per port PoE function enable/disable
– PoE port power feeding priority
– Per PoE port power limitation
– PD alive check
– PoE schedule
Battery Management
• Battery type option: Lithium battery or lead-acid battery
• Easy diagnostic of the system operating status via LED
indicator
• Current battery usage status
• Low voltage cut-off protection: Send alert and cut off power
when the battery is low
• MPPT (Maximum Power Point Tracking) Charge Controller
– Reverse current protection to prevent the current circuits
fromowingbacktothePVpanel
– Over-current protection
– Reverse polarity protection (for battery and charging
electrodes)
Industrial Case and Installation
• IP30 aluminum case
• DIN-rail and wall-mounted designs
• Supports -10 to 60 degrees C operating temperature
• Supports ESD 6KV DC Ethernet protection
MPPT (Maximum Power Point Tracking) Charge Controller
An MPPT (Maximum Power Point Tracker) is an electronic DC to DC converter that
optimizes the match between the PV solar panels and the battery bank or utility grid.
They convert a higher voltage DC output from solar panels (and a few wind generators)
to the lower voltage needed to charge the battery effectively. It can support PV module
input of up to 400W of power.

Summary of content (10 pages)