- Planet Router with USB User's Manual

If enable ACL, and then only the effective IP in ACL can access the router.

Step1 If you want to enable ACL, please choose "Enable" and then press "Apply

Changes" to apply your setting.

Step2 Click the Enable checkbox.

Step3 Enter the host IP address that you want to permit and click “Add”.

Step4 Press "take effect" to enable the configuration.

"Note

If you choose "Enable" in ACL Capability, please make sure that your

host IP is in ACL before it takes effect. Or you will not manage the

device from your PC.

3.7 Diagnostic

Your router is capable of testing your network and DSL connection. The individual tests are

listed as Ping, ATM Loopback, ADSL and Diagnostic.

3.7.1 Ping

This page is used to send ICMP ECHO_REQUEST packets to network host. The

diagnostic result will then be displayed.

Host Address: Enter the IP address that you wish to test. And then click “Go!” button for

testing.

3.7.2 ATM Loopback

Connectivity verification is supported by the use of the OAM loopback capability for both VP

and VC connections. This page is used to perform the VCC loopback function to check the

connectivity of the VCC.